VM-W wood moisture meter is a high-performance and digital moisture testing equipment firstly launched in our country by our company based on introduction of foreign advanced technology.The instrument adopts high frequency principle,digital display, sensors and main body together as one, equipped with ten gear is used to measure different kinds of woods.
Product features:
1.VM-W Wood Moisture Meter,adopted the high-frequency principle, LCD back light digital display, the densor and the host all in one.
2.VM-W Wood Moisture Meter,easy Operation and no need use training,when measures the textile materials only gently press the instrument sensor above it.
3.Short test time,high efficiency and undamaged.
4.VM-W Wood Moisture Meter, small size, light weight, portable on-site rapid testing,VM-P is a good helper for testing personnel to detect the moisture content on-site.
Technical details:
Application:
VM-W is widely used in various types of rapid determination of Measurements of various timber, wood, furniture and other moisture, without the wood surface or internal perforation, just light pressure sensing probe instrument in the wood surface, 1 second after the numerical stability, namely wood moisture content.
Notice:
1. When measuring, holding the lower part of the instrument, the body of the instrument and the object to be measured kept parallel,Let the instrument's three sensing probe gently pressed in the surface of the object to be measured.
2. Due to high frequency has a strong penetration,So when measuring If the surrounding metal can cause inaccurate measurement.And Please Let the Sensor away from metal material.
3. All of the three sensing probe must be touched with the object to be measured when testing.
4. When the display can not adjust within ±00.5,Please replace a new battery.If the problem isn't the power,Please turn open the battery cover, find the tail of zero knob, with a flat screwdriver to open a small hole in the potentiometer, the instrument zero in less than 00.5.
Operation steps:
①Ensure the Testing object thickness Over 50mm.
②Holding the lower part of the instrument, the instrument housing is substantially parallel to the object to be measured
③Gently press the instrument sensor above the object to be measured.
Then instrument will Show The Moisture Date.
Contact information：
Hangzhou Judong Technology Co., Ltd.
Contact: Pearls
Tel: +86 571 82519092
Fax:+86 571 82501775
Mobile phone：+86 13958104917
WhatsApp:+86 13958104917
WeChat:13958104917
Skype:pearls@163.com
Email :pearls@judongkj.cn
