VM-01S Halogen Moisture Analyzer works for the injection of iodine or bromine and other halogen gas in the bulb, at high temperature, the sublimation of tungsten and halogen chemical action, sublimation of tungsten on tungsten will re-solidify to form a balanced cycle, to avoid premature rupture of tungsten. Therefore live longer than incandescent halogen bulbs. And because the filament can work at higher temperatures, resulting in a higher brightness, higher color temperature and higher luminous efficiency.
VM-01S Moisture Analyzer distinguish it from other products in that moisture traditional oven drying method is generally used to test a sample of three or even take two or three or four hours and needs by weighing scales, manual calculation, in order to obtain Moisture value (water content) of the sample. Low efficiency of traditional oven method of moisture determination, not able to adapt to the fast pace of production needs. VM-01S high efficiency of the drying heater - high quality ring halogen, samples are quick and uniform heating, water samples continued to be dried. The entire measurement process, rapid moisture analyzer fully automated real-time display of measurement results: Sample weight, moisture content, solids, measurement time, the heating temperature.
VM-01S Halogen Moisture Analyzer application of the international principle oven drying, moisture determination with the oven method of measurement of a good consistency, efficiency is much higher than the moisture determination oven method. Use VM-01S Halogen Moisture Analyzer, general sample measurement is completed only a few minutes, so by the business users love and praise.
Product features:
1.No need to install & commissioning
2.Easy Operation and no need use training
3.Short test time and high efficiency
4.Heating uniformity, stable performance, high accuracy
5.Small size and light weight
6.Automatic measurement,End buzzer,Without care when working
7.Versatile,suitable for almost all sectors of moisture determination
8.High performance electromagnetic force sensor, the maximal capacity can reach 5mg readability,
provide the best measured performance.
9.Unique windscreen design,makes the weighing system more stable
10.Show the moisture(water content) & Solid content at the same time
11.Pure stainless steel heating chamber cavity cover, high temperature, easy to clean.
Technical details:
Application:
VM-01S Halogen Moisture Analyzer applies to all the needs of rapid determination of moisture in the industry, as long as granular, powder, flakes, non-volatile liquid can be measured, such as: the pharmaceutical industry, chemical industry, electronics and semiconductor industries, plastic materials, rubber, tobacco, tea, food, starch, feed, coal, sand, sewage sludge, dairy and so on. VM-01S Halogen Moisture Analyzer is the best choice for enterprise production process and laboratory moisture measuring device!
Notice:
1. Halogen Moisture Analyzer is used to measure the moisture content of the sample, for any other purpose may be personal injury and damage the equipment.
2. Be sure to read the instructions before use, do not meet the requirements under the environmental conditions.
3. The instrument around should ensure that there is enough space to avoid heat accumulation and overheating.
4. Due to the heating unit surrounding area around the instrument becomes hot, do not place flammable materials around the instrument.
5. After the test, because the sample itself and the heating unit and its container will still be very hot, so be careful when removed samples.
6. In the heating and drying process,heating element temperature will reaches 400 ℃. So do not open or touch the heating unit. If you need to open disconnect the power and wait until it is completely cool.
7. Matrix contains toxic elements, which matrix only under conditions of good ventilation, heating and drying.
Operation steps:
①Put the sample into the sample tray average.
②Cover the heating enclosure
③Press the "start" key.
Then instrument will work automaticly,when finishedThe instrument alarm automatically, then the measurement results will show on the LCD screen.
Contact information：
Hangzhou Judong Technology Co., Ltd.
Contact: Pearls
Tel: +86 571 82519092
Fax:+86 571 82501775
Mobile phone：+86 13958104917
WhatsApp:+86 13958104917
WeChat:13958104917
Skype:pearls@163.com
Email :pearls@judongkj.cn
